Steel Universal Beam UB 406x178x54

Free standard delivery on RSJ steel beam orders over £200 ex VAT.
Steel Universal Beam UB 406x178x54
Steel Universal Beam UB 406x178x54
Steel Universal Beam UB 406x178x54
(Excl VAT)
(Incl VAT)

Our Universal beams are also known as I- beams, I section, H Section, H beams, RSJs and Steels. Our RSJ’s are highly suited to construction and manufacturing projects where structural support is essential. They are hardwearing and strong.

The steel beam size shown are the height in mm (the web) x the width in mm (the flange) x the weight per metre in Kg. The vertical middle section of the beam is known as the 'web' and the horizontal component is the 'flange'. The vertical “web” and the horizontal “flange” of a Universal beam are different.  

The height and width are measured as if looking at as a capital letter I, hence the name I beam.

The universal beam is rolled from a single piece of structural steel to maintain its structural integrity. All our RSJ’s are S355. S355 describes hot rolled structural steel with 355N/mm^2 minimum yield strength It is essential for major support.

For home building it is used to support walls and floors when making an opening in a load bearing wall or when building an extension. They are also used to make retaining walls in landscape gardening with sleepers placed between them. Another everyday constructional use for the universal beam is to construct the frames of modern office blocks, industrial warehouses and parking garages. Universal Beams are designed to take the weight of the structural support on its length, whereas a universal column normally holds loads along its vertical axis. Neither universal beams or columns are not equipped to take bidirectional loads. 

So that you comply with building regulations, you will need a structural engineer to calculate the loading and supply you with loading certificate and the necessary dimensions. Unfortunately, our team are unable o advise you on the size you require for your project.

At SPD your universal beam can be cut to any length.

All of our Universal Beams are supplied at grade S355 ensuring you receive the best quality material for your project. Please see our table below for advice on Universal Beam Grading. 

Structural Steel Grade    Tensile Strength MPa at Nom thickness between 3mm and 16mm
S235                                   360 – 510 MPa
S275                                   370 – 530 MPa
S355                                   470 – 630 MPa

Also know as: Steel Lintels, Steel Girder and load bearing steels, I-beams, I sections, H sections, Universal Beams, H beams and RSJs

Specification / Measurements
Web (mm): 406
Flange (mm): 178
Weight (kgs per m): 54.1
Grade: S355JO

We offer FREE standard delivery on Mild Steel, Engineering Bar and Tube Clamp products for orders over £300 ex VAT.

Delivery is 2/5 days on all mild steel and engineering steel products standard and cut. 48Hour Delivery available on most standard length orders but will depend on the delivery address provided. Please check with our chat team if quicker delivery is required.

Tubeclamps can be delivered next day and the same goes for our Stainless and Handrail products.

If you require urgent/next-day delivery please speak to our team on our live chat.

To find out more about our delivery and click and collect options, please click here.

Please find our Ts & Cs here